by Eujin Pei, Director, Postgraduate Research; Director, Product Design Engineering, Brunel University, London
This session will briefly discuss the state of art related to shape changing behaviours, and current barriers towards communicating aspects of 4D Printing.
Continue reading “Shape Changing Behaviours and Communicating 4D Printing”
A presentation by professor Suong Hoa, Director, Concordia Center for Composites (CONCOM), Canada.
4D printing of composites (abbreviated as 4DPC) is a manufacturing technique that can produce composite structures with complex geometries without the need for complex molds. The technique is also termed “Mouldless composite manufacturing”. This technique utilizes light weight, high strength, high stiffness composite materials that have been used to make light weight components for space structures, aircrafts, automobiles. wind turbine blades, and sports equipment.
Continue reading “4D printing of composites.”
A duo presentation by Frederic Demoly, Associate Professor at Université Bourgogne Franche-Comté, UTBM and Jean-Claude Andre, CNRS.
Over the past decades, the combination of technical/scientific advances in additive manufacturing (AM) and smart materials (SMs) domains has enabled the booming development of a new interdisciplinary converging research area: 4D printing.
Continue reading “The status, barriers, challenges and future of 4D printing in design and engineering”
A presentation by Giulia Scalet, Assistant Professor, DICAr, University of Pavia.
4D printing is a disruptive additive manufacturing paradigm that utilises active materials to produce customized structures capable of changing their shape, properties, and functionalities over time (the 4th dimension) under the application of proper stimuli.
Continue reading “Enabling hierarchical motion in 4D printed structures by means of the temperature-memory effect in polymers: experimental and computational aspects”
A presentation by Ali Zolfagharian, Deakin University, Australia.
Soft robotics is a recent and rapidly growing field of research that encompasses emerging advances in functional materials, fabrication, modeling, and performance control with important applications in the manipulation of fragile objects.
Continue reading “Closed-loop Control of 4D-printed Soft Robots”
A presentation by Mahdi Bodaghi, Nottingham Trent University.
Recent advances in AM created 4D printing technology as an emerging technology for crafting meta-materials and smart devices that can change their shape and/or function on-demand and over time.
Continue reading “Shape Memory Metamaterials by 4D Printing Technology”
A presentation by Antoine le Duigou is Associate-Professor in Institut de Recherche Dupuy de Lome at Université de Bretagne Sud (Lorient France).
This presentation proposes a critical overview of the current state of 4D printing of hygromorph biocomposites for stimuli-responsive applications.
Continue reading “4D printing of bioinspired hygromorph natural fibre composite : Green and Smart functionalities”
Hygromorph BioComposites (HBC) are categorized into a new class of smart materials that could be used for 4D printing of shape-changing mechanisms. Fibre anisotropic properties, fibre content and their orientation, polymer stiffness are material parameters that control the morphing. Slicing parameters during 4D printing such as Layer Height and various Interfilament Distance enable a programmation of the hygromorph biocomposites response. The potential of sequential complex actuation will be discussed.
by Lorenzo Moroni, MERLN, Maastricht University
A key factor in scaffold-based tissue and organ regeneration relies on enhancing (stem) cell-material interactions to obtain the same original functionality. A possible way to build in functionality at the interface between materials and cells can be offered by 4D (bio)printing. Whether we are really witnessing 4D printing, a process which should be defined when the programmed temporal shape change happens during the 3D manufacturing itself, or not is still to be clarified in the field.
Continue reading “4D printing or not 4D printing? Mechanically actuatable 3D scaffolds for regenerative medicine”
by Eujin Pei, Brunel University London
This presentation provides a brief overview of 4D Printing and discusses some potential applications.
program: https://www.4dpmmconference.com/program/; Register here to attend the online conference
Continue reading “4D Printing – An Overview and Emerging Applications”
presentation by Brittany Mark, Victoria University of Wellington at online 4D Printing & Meta Materials Conference, May 26, 2020, 09:00 – 12:00 CET.
Auxetic Structures are a class of Metamaterials uniquely characterised by their Negative Poissons Ratio, that is when a lateral force is applied they expand longitudinally, becoming thicker and stronger, perpendicular to the strain. This counterintuitive behaviour has many enhanced behavioural properties, our research has specifically focused on their response to impact forces for sports protection scenarios.
Continue reading “Utilising Parametric Customisation to Translate Auxetic Structure Theory into Additively Manufactured Multimaterial Performative Geometries”